Repair Clog Epson Printer Head

Head clog or writing does not come out when the print is a common problem faced by all users of the printer includes all of us. One of the printers that often have problems head is clogged Epson head. And this time we will discuss on How to Repair clogged on Epson Printer Head.

 Causes of  Clogged Head on Epson Printers:
1. Epson printers are rarely in use.
2. Epson Printer maintenance is rarely done (for example, the print head cleaning).
3. Frequently changing dressing types and brands of ink epson
4. Too late to refill the ink, resulting in overheating / heat on epson printer head.

Tools for Addressing Head Buntu on Epson Printers:
1. Cleaning fluid head (head cleaner), the brand is up to you.
2. Injections are equipped with a hose to the nozzle head epson
3. Tissue

Here's How to Repair Clogged Head on Epson Printer:

1. Prepare injection containing 5ml head cleaning fluid and tissue that has been in the fold, and insert the rubber nozzle on the injection.


2. Set the head unit position into the printer with the software or manual, then take the cartridge and unplug the printer power.
3. Slide Head to the edge, then put a tissue paper roll evenly in front of the printer.
4. Plug the hose nozzle on a pole that headnya dead-end Epson printers, and then pull inject up to 10ml, injection press slowly until the liquid runs out.
 

5. If the clog ink resulting frozen head stuck in the nozzle was out on the tissue, then the nozzle cleaning process has been successful.
6. Replace the cartridge epson ink already loaded, Perform head cleaning and print Nozzle check pattern in software / manual. And the head stuck on epson been resolved.

Similarly, an explanation of How to Cope Head Buntu on Epson Printer, may be useful!

Goodluck

Related Post

6 comments:

  1. Great post! The fact that you means someone is reading and liking it! Congrats!That’s great advice.
    fix print head

    ReplyDelete
  2. Hi there and thanks for this interesting and important post.I really enjoy you post Really its amazing.

    repair print head

    ReplyDelete
    Replies
    1. Thanks for your comment and attention

      Delete
  3. Hi Habbi,I would like to say that this blog really convinced me, you give me best information! Thanks, very good post.

    Printhead911

    ReplyDelete

Search This Blog