Easy Ways to Overclock

This thread specially made for people who still lay with the overclocking. Overclocking is actually what the heck? Overclocking or often abbreviated as OC is the act of forcing the PC to work on a performance that has been specified by the manufacturer. Side effects of OC is to damage PC components overheat, So with this before all the worst case happens that all the damage that happens to your hardware is not the responsibility of the author, or in other words, the damage is your own responsibility.

There are rumors saying overclocking can eliminate the warranty, so the warranty does not apply, although not yet expired. Well, but besides that I see many cases of people that the hardware is damaged due to overclocking, but the warranty remains valid.Step 1 - Identification of ComponentsBefore you start overclocking, an investigation prior specification of your PC.(Motherboards, RAM / Memory, Processor, VGA Card, PSU (Power Supply Unit))Step 2 - Brand Right for Hardware OverclockingFind out more in the back of the motherboard chipset are you using. This chipset is useful to know how much the ability to help overcklocking performance motherboard in your processor. Here is a list of INTEL chipset that ability was able to overclock even more awesome. Oh yes, it is usually to find out what chipset you use on your motherboard, can see the type of  (motherboard) you are using software  Everest for example.Example IX-38 Asus Abit Quad GT Intel X38 chipset means wearing.Intel chipsetP965P35X38P48X48P45X58 (Core i7 / Nehalem)List your chipset is not here? Not to worry, OC is basically not influenced by the type of chipset you are using. Cuman, pake chipset that is on top, the OC that you can be more devastating. For example you still kind of old  chipset 915P, 945P, a result that you get very small.
What is Considered Good MotherboardBiostar = The price is cheap, and the ability to really make sense if judging from its price per performance. Suitable for you who like to overclock options in BIOS is easy to understand. However, a series Biostar TP35 / TP45, for another  series anyway, less assured, there are weaknesses in its lack of other facilities such as firewire, lan 2xgigabit, solid caps.Asus = If the HP world, something like the rich. Winning in the name, and also won in its features are abundant, but if the performance problem OC, still under the DFI and Biostar. Except for asus series of high-end and its flagship, like Maximus 2 Extreme, Rampage 2 Extreme.
Abit = Performance tolerable and supported better facilities than the biostar, and also its a good after sales. Suitable for beginners who want to learn overclocking, the standard budget.= Gigabyte DQ6 is a high end version of its Gigabyte, or want to try on its flagship series, EP45 Extreme? Its definitely awesome.DFI = Perfect choice for enthusiast overclockers. BIOS Option complex shows that this mobo gives a chance to overclock as high. The price is also far below the other mobo, the mobo.
RAM: Team Xtreme (Not Dark), A-Data Extreme Edition, G. Skill, OCZ.Step 3 - Mental PreparationMust be with a blank mind. Not thinking, the warranty is lost, damaged hardware, but be careful. Step by step, do not rush increase performance, if not the hardware could be damaged.Step 4 - Before Overclock1. Overclock can also make the system unstable, a challenge for us to make stable in particular overclocking results.2. Even numbers are not everything. For example raising the FSB Processor from 200 to 400. It could be 400Mhz and that not of maximum overclock. Probably could have maximum 433Mhz.3. Not all the same processor can be increase with the OC software with the same frequency. For example, the results after Core2Duo E8500
overclock 3.16 GHz of 6.2 GHz is not necessarily the same as the E8500 that we use. Why? Because all processors were basically made in the same container, after it had tested at the level where he tested and can get through the test. For example, processor E2xxx tested, and if it can pass the test then processor 1.8 GHz was labeled E2180 (2.0 GHz), if only 1.8 GHz 1.6 GHz or it will be labeled E2160 and E2140.4. Button / Clear CMOS JumperIf you do not know where this part, better undo your intention for OC.Clear CMOS jumper is the reset button, which resets the BIOS when it can not enter into it.Usually the buttons / clear cmos jumper is near the bios battery.
How to return? reposition the jumper from 1-2 to 2-3, then Press the power (usually not a flame) and back again the position of the jumper from 2-3 to 1-2. Means you've returned to the initial setting bios settings, if the mobile phone factory settings restore his name.Step 5 - OverclockingWelcome to the BIOS menu (Basic Instruction Operating System). This is where you OC your processor to get maximum results. Confused in the BIOS menu? Will you find the first row to the left, there are contain information about your processor, your computer such as frequency, multiplier, voltage, etc.. Not all BIOS menu on your processor, usually the frame on the top.
Well if the picture above is located on the "Frequency / Voltage Control".Frequency ProcessorChange the freq processor you little by little, each 5MHz 10MHz or enough, better if 2-3MHz, then save and exit. If the future was not able to enter the bios, or no strange sounds from the CPU, what should you do? It was a sign setting you can not be executed by the motherboard.
Comparison of FSB and RAMPoint to memory that you use will not be a bottleneck when the OC. Most people complain because the memory is not strong. "Why is not my memory stronger?" Freq processor is usually because you can not run:DDR2-PC6400 memory means walking in 6400:8 = 800MHzDDR2-PC5300 memory means walking in 5300:8 = 667MHzDDR2-PC4200 memory means walking in 4200:8 = 533MHzConclusion? The ability of PC6400 memory runs seen, PC5300, PC4200 trus divided by 8.
Knowing Frequency Memory and ProcessorAs an example I use E2160 (9x200MHz).--- If the 1:1 ratio PROCIE FREQ 200MHz, then multiplied by 2 FREQ RAM, which is 400MHz.Ratio of 3:2 --- If FREQ PROCIE 200MHz, then FREQ RAM (2 multiplied by 3 divided by 2, the result 3), which is 600MHz.Ratio of 4:5 --- If FREQ PROCIE 200MHz, then FREQ RAM (2 multiplied by 4 divided by 5, the result 1.6), which is 320MHZ.Ratio of 2:1 --- If FREQ PROCIE 200MHz, then FREQ RAM (2 multiplied by 2 divided by 1, the result 4), which is 800MHz.Blue Screen It was a sign there is something wrong with the bios settings you guys. Usually accompanied by the sounds strange u / specific motherboard. Do not panic bro, it's just a small mistake really. Various factors that make computer did not want to flame, following a common issue for small errors in the OC.1. Memory is not strong lift, caused by the memory freq is too high / low in comparison with standard freq. Example, ddr2 pc 5300 (667 MHz) when run on the freq> 700MHz (think ") sometimes" can be an error. Not all rich like this  memory, depending on the brand of memory really.
2. Log into the bios anyway, but when entering the windows there is a blue screen (the words "Windows memory dump")Well if this problem lies in the voltage of the CPU and Memory is allocated to you, (for OC an extreme problem is also related to the voltage of the northbridge and southbridge).Just increase Memory and CPU voltage in small increments. Do not be too much, why? CPU so that it is not overheated / too hot, which can lead to damage. Increase only about 0.01 to 0.05 v (Processor) and 0.1 to 0.2 V (Memory). Keep the temperature of your processor.Do clay processor temperature in the BIOS, can sometimes be deceiving. Just use standard software, such as core temperature, etc.. Just click here.3. The computer can not burn. Take it easy bro, just change the Clear CMOS jumper, as described above.Step 6 - Checking1. Stability ProcessorMost processor initially stable after in-OC (entry windows, run it a few applications, etc..) But is actually not just the 10 minutes-30 minutes for computer Seeing you on the road stable frequency or not that much, but it took about 7-8 hours.2. TemperatureDo not get too hot too bro you processor temperature, MAX at 60C was made of daily activities in non-conditioned room. If more of limit, it's be better to set to the lower frequency,
that is not easily damaged

Related Post

No comments:

Post a Comment

Search This Blog